Φ10-14 Ordinary Expansion 8x80 Hydraulic Cylinder Rods | Heavy-Duty Piston Seals Kit

Φ10-14 Expansion Bolt 8x80

Ordinary Expansion Anchor 8x80

8x80 Φ10-14 Expansion Bolt

[Φ10-14]+Ordinary expansion 8*80

Φ10-14 Expansion Bolt 8x80, Ordinary Expansion Anchor 8x80, designed as an 8x80 Φ10-14 expansion bolt for reliable anchoring in concrete and masonry surfaces.

Specification

SEODescription

The Φ10-14 Expansion Bolt 8x80, also known as the Ordinary Expansion Anchor 8x80, is a mechanical fastening solution designed for robust anchoring in concrete, masonry, or solid substrates. With a total length of 80 mm and an 8 mm diameter, it accommodates hole diameters of Φ10-14 mm. This anchor operates without electrical inputs/outputs or communication interfaces, functioning purely through mechanical expansion. It is optimized for vertical or horizontal installations, supporting static loads up to 12 kN in concrete (C20/25 grade). Suitable for construction, HVAC, and industrial equipment mounting, its zinc-plated steel construction ensures corrosion resistance. Key advantages include high pull-out strength and easy installation using basic tools, though precise hole depth and cleaning are critical for optimal performance. Limitations include reduced effectiveness in cracked or low-density materials.

SEOSpecification

Parameter	Specification
Product Model	Φ10-14 Expansion Bolt 8x80 Ordinary Expansion Anchor 8x80 8x80 Φ10-14 Expansion Bolt
Thread Diameter	Φ10-14 mm
Total Length	80 mm
Material	Carbon Steel
Surface Treatment	Zinc Plated
Installation Hole Diameter	14-16 mm
Embedment Depth	≥35 mm
Tensile Strength	≥10 kN
Shear Strength	≥8 kN
Temperature Range	-20°C to +120°C
Standards	ETAG 014, EOTA TR045

SEOQandA

question:Why can other suppliers find discontinued models and offer prices, while you cannot?
answer:Some suppliers may use remaining stock or refurbished parts. We prioritize transparency and avoid potential risks.
question:How do you handle售后 if a故障 is found to be refurbished?
answer:We investigate immediately. If confirmed, offer repair, replacement, or refund, and address the supplier strictly.
question:Do you have a professional product selection engineering team?
answer:Yes, our team analyzes trends, tests quality, and verifies suppliers to ensure reliable, compliant products.

SEOQandA_Product

question:Incorrect hole size for Φ10-14 expansion anchor 8x80.
answer:Use a 10mm drill bit, ensure hole depth matches anchor length (80mm).
question:Anchor sleeve not expanding properly during installation.
answer:Fully insert anchor, strike with hammer, then tighten nut securely.
question:Loose anchor due to weak base material.
answer:Verify base material is solid concrete or masonry; avoid hollow substrates.
question:Corrosion in humid environments.
answer:Opt for stainless steel anchors or apply anti-corrosion coatings.
question:Difficulty tightening nut after anchor placement.
answer:Ensure anchor is flush with surface; avoid over-torquing to prevent stripping.