6XV1873-6DT10 PROFIBUS FC TP PUR Cable | SIMATIC NET Industrial Ethernet | SIEMENS

6XV1873-6DT10

Shielded PROFIBUS DP Cable

Siemens DP Connector Cable

6XV1873-6DT10

6XV1873-6DT10 is a shielded PROFIBUS DP cable designed for reliable industrial communication networks, compatible with Siemens DP connector cables. Ensures high-speed data transfer, EMI resistance, and durability in harsh environments. Ideal for Siemens PLCs and automation systems.

Specification

SEODescription

The **6XV1873-6DT10** is a **Shielded PROFIBUS DP Cable** designed for robust industrial communication, specifically optimized for use with **Siemens DP Connector Cable** systems. This high-performance cable supports PROFIBUS DP networks, enabling reliable data transmission at speeds up to 12 Mbps over distances up to 1,000 meters. It features a double-shielded design (foil and braid) with twisted-pair conductors, ensuring immunity to electromagnetic interference (EMI) in harsh environments. The cable operates within a voltage range of 30 V DC and a temperature range of -30°C to +70°C, making it suitable for automation, manufacturing, and process control industries. It directly connects up to 32 nodes per segment via 9-pin D-Sub or M12 connectors. Key advantages include durability, signal integrity, and compliance with PROFIBUS standards, though its rigidity may complicate installation in tight spaces. Ideal for integrating Siemens PLCs, drives, and I/O modules in demanding applications.

SEOSpecification

Parameter	Specification
Product Model	6XV1873-6DT10
Application	Shielded PROFIBUS DP Cable
Connector Compatibility	Siemens DP Connector Cable
Cable Type	Twisted pair, shielded
Conductor Material	Bare copper
Shielding	Double-layer (foil + braided shield)
Impedance	150 Ω ±15% (3-20 MHz)
Capacitance	≤60 nF/km
Voltage Rating	300 V AC
Temperature Range	-30°C to +70°C (operating)
Standards	IEC 61158, PROFIBUS DP compliant
Outer Diameter	≈10.3 mm
Conductor Gauge	2 x 0.64 mm² (AWG 22)

SEOQandA

question:Why choose your company for purchases?
answer:We are Asia's leading industrial automation trader with 20 years of expertise, reliable products, and 85% repeat customers.
question:How do you handle refurbished product malfunctions?
answer:We offer free replacement or refund for any confirmed refurbished product defects, ensuring strict quality checks pre-shipment.
question:Why is a handling fee charged?
answer:The fee covers administrative and logistical costs to ensure efficient, transparent transactions. It's minimal and justified.

SEOQandA_Product

question:Why does the 6XV1873-6DT10 cable cause communication errors in PROFIBUS networks?
answer:Check shielding continuity, ensure proper termination resistors (220Ω at both ends), and verify cable length ≤1200m.
question:How to resolve signal attenuation in 6XV1873-6DT10 installations?
answer:Use repeaters for runs >1200m, avoid sharp bends (min. bend radius 80mm), and ensure no parallel high-voltage cables.
question:Why does 6XV1873-6DT10 show intermittent connectivity in harsh environments?
answer:Verify IP rating compliance, use M12 connectors for moisture/dust protection, and inspect for shield damage.
question:How to address ground loop issues with 6XV1873-6DT10?
answer:Use single-point grounding, isolate bus connectors, and ensure shield connects only at controller end.
question:Why does 6XV1873-6DT10 fail EMC compliance tests?
answer:Ensure full shield coverage (no gaps), use ferrite cores near noise sources, and maintain 30cm separation from power lines.