FX2N-32MR-DS Mitsubishi FX2N Series PLC Programmable Logic Controller FX2N32MRDS

Mitsubishi FX2N-32MR-DS

FX2N-32MR-DS Relay Output

FX2N-32MR-DS 24VDC

FX2N-32MR-DS

Mitsubishi FX2N-32MR-DS PLC features 16 digital inputs and 16 Relay Outputs, powered by 24VDC. Compact design with built-in relay contacts for industrial automation, motor control, and machinery applications.

Specification

SEODescription

The Mitsubishi FX2N-32MR-DS is a compact programmable logic controller (PLC) featuring 16 digital inputs (24VDC) and 16 relay outputs (FX2N-32MR-DS Relay Output), designed for versatile industrial automation. It supports direct expansion with up to 7 modules, including I/O and communication units, and integrates RS-422/485 interfaces for seamless connectivity. Operating on a wide AC voltage range (100-240V), the FX2N-32MR-DS 24VDC input system ensures compatibility with standard sensors and devices. Suitable for manufacturing, HVAC, and water treatment, its relay outputs handle AC/DC loads but have limited switching cycles. Advantages include rugged design, easy scalability, and reliable performance in 0–55°C environments. Drawbacks include potential relay wear in high-frequency applications and external power requirements for input peripherals.

SEOSpecification

Parameter	Specification
Manufacturer & Model	Mitsubishi FX2N-32MR-DS
Output Type	FX2N-32MR-DS Relay Output
Power Supply	24VDC (100-240VAC compatible)
I/O Configuration	16 Input / 16 Output
Input Signal Voltage	24VDC (Sinking/Sourcing)
Output Relay Rating	2A 250VAC / 2A 30VDC
Power Consumption	40W max
Operating Temperature	0°C to 55°C
Communication Interface	RS-422 / RS-485
Dimensions (WxHxD)	130 x 90 x 86 mm
Input Current	7mA/24VDC
Output Current	0.5A/point (Relay)
Protection Class	IP20
Vibration Resistance	10-25Hz (5mm amplitude)
Shock Resistance	147m/s² (3 times)

SEOQandA

question:Can I schedule a self-pickup with the official courier?
answer:Yes, you can schedule self-pickup. Please contact our support for courier details and procedures.
question:Does the company have a professional product selection engineering team?
answer:Yes, we have a dedicated team of engineers specializing in product evaluation and selection.
question:Can the company provide upgraded or alternative product models?
answer:Yes, we offer upgraded and alternative models. Provide your requirements for tailored recommendations.

SEOQandA_Product

question:Input signals not responding on FX2N-32MR-DS.
answer:Check wiring connections, verify sensor power supply, and monitor input status via programming software. Ensure input LEDs activate when triggered.
question:Output relays not activating on FX2N-32MR-DS.
answer:Confirm load is within relay ratings (e.g., 2A@250VAC). Test with a known-good relay module or replace output terminal block if contacts are worn.
question:FX2N-32MR-DS communication failure with SCADA.
answer:Verify COM port settings (baud rate, parity) match both PLC and SCADA. Test with a null-modem cable and ensure proper RS-232/485 converter configuration.
question:PLC power LED flickers or turns off.
answer:Measure DC input voltage (24V±10%). Replace power supply if voltage drops below 21.6V or check for short circuits in I/O circuits.
question:Expansion module not recognized by FX2N-32MR-DS.
answer:Confirm module is FX2N-compatible (e.g., FX2N-16EX). Check side connector alignment and tighten screws. Power cycle PLC after installation.