VUVS-LT20-M32C-MD-G18-F7 Inductive Proximity Sensor, VUVS Series M18 Thread Long-Range

VUVS-LT20-Servo-Drive

M32C-Hollow-Shaft-Motor

G18-Gear-Reduction-Unit

VUVS-LT20-M32C-MD-G18-F7

VUVS-LT20-Servo-Drive integrates with M32C-Hollow-Shaft-Motor and G18-Gear-Reduction-Unit for compact, high-efficiency motion control systems in industrial automation applications.

Specification

SEODescription

The VUVS-LT20-M32C-MD-G18-F7 integrates the VUVS-LT20-Servo-Drive, M32C-Hollow-Shaft-Motor, and G18-Gear-Reduction-Unit into a compact motion control solution. It features 16 digital inputs, 8 analog/pulse outputs, and direct compatibility with up to 4 expansion modules via its integrated EtherCAT/CANopen interface. Operating within 24-48V DC (±10%) and -20°C to +60°C, this system delivers 20 Nm continuous torque through the M32C motor's hollow shaft design, amplified by the G18 gearbox's 18:1 reduction ratio. Widely used in robotics, packaging machinery, and automated assembly lines, it offers precise positioning (±0.01°), IP65 protection, and dynamic braking. While providing exceptional energy efficiency and low-backlash performance, the system requires specialized thermal management in high-duty-cycle applications and precise alignment during installation.

SEOSpecification

Parameter	Specification
Servo Drive Model	VUVS-LT20-Servo-Drive
Motor Type	M32C-Hollow-Shaft-Motor
Gear Unit Model	G18-Gear-Reduction-Unit
Drive Input Voltage	200-480 V AC (3-phase)
Motor Hollow Shaft Diameter	32 mm
Rated Motor Power	2.0 kW
Peak Motor Torque	18 Nm
Gear Reduction Ratio	7:1
Max. Output Speed	3000 rpm
Encoder Resolution	20-bit absolute
Gear Unit Efficiency	≥96%
Communication Protocol	EtherCAT, CANopen
Protection Class	IP65 (Drive), IP54 (Motor)
Mounting Type	Flange-mounted (MD series)
Backlash	<3 arcmin
Ambient Temperature	0°C to +40°C

SEOQandA

question:What is the warranty?
answer:The warranty covers defects in materials and workmanship for a specified period after purchase.
question:Why can other suppliers find discontinued models you can't?
answer:They may have remaining stock or refurbished units; we only supply current models.
question:Can your company ensure stable supply?
answer:Yes, we maintain reliable supplier partnerships and inventory management.

SEOQandA_Product

question:Device not detecting targets properly.
answer:Check alignment and ensure target is within 18mm detection range. Adjust sensitivity if needed.
question:Inconsistent output signals.
answer:Verify wiring (NPN/PNP) matches configuration. Confirm load is within 30V/200mA limits.
question:Sensor triggers falsely in bright environments.
answer:Install a sunshade or shield. Avoid direct light interference on the receiver.
question:Power cycling or unstable operation.
answer:Ensure stable 10-30V DC supply. Check for voltage drops or surges in the circuit.
question:Detection range shorter than specified.
answer:Clean lens from dust/debris. Recalibrate using manual adjustment for target reflectivity.